Audio source
Audio source is by default configured for TELM to route telemetry data from the CORE processor to the video
transmitter downlink.
External audio can be connected via the CAM-port. The audio in is the white wire on the camera cable. To
enable external audio, open the unit by removing the 4 screws, as shown above. On the AUD solder pads,
solder a bridge between the center pad and EXT-pad. To change it back to telemetry, undo the bridge and join
center pad and the TELM-pad.
Configuration for:
•
TELMetry audio source
Configuration for:
•
EXTernal audio source (via CAM)
The TBS CORE PNP PRO has no on-board microphone to keep the size down, but can still be connected
externally via the CAM-port.
9
