Important
To keep the system stable and in a healthy condition, make a note of the following.
•
Do not hot-plug the system - disconnect battery power when setting up or reconfiguring the system
•
Backup power 2S only - a separate backup LiPo battery pack should not exceed 2S
•
Calibrate on the field before your first flight - the signal strength indicator and compass is best
calibrated in conditions similar to the flight environment
Specifications
Functions:
Voltage regulator, on-screen display, current sensor, flight location data
Input voltage:
2S to 6S (7.4 to 26V DC) - backup power max. 2S
Output voltage:
5V @ 2A, 12V @ 600mA - individually, not combined (max. 8-10W load)
Switching efficiency:
>85% at nominal load
Audio source:
External left/right channel pass-through or telemetry audio
Video signal:
1.0Vp-p 75 Ohm video signal
RSSI signal:
Analog voltage, digital PWM signal and EzUHF OSD Link
Current sensor:
100A max. - digital interface, power tap for regulators
USB type:
Micro USB
Port connectors:
Molex PicoBlade 1.25mm pitch sockets
Working temperature:
0 - 40
°
C
Dimensions:
27 (H) x 47 (W) x 12 (D) mm
Weight:
15.6g
Kit contents:
1x TBS CORE PNP PRO, 1x TBS current sensor module, 2x BST cables, 1x
EZUHF Link cable, 1x 3-pin RSSI cable, 1x Camera and 1x VTx pigtail cables
Optional Accessories:
1x TBS GPS module with backup power
2
