TBS CORE PNP PRO Unit
The TBS CORE PNP PRO filters EMI and other sources of interference and protects your sensitive FPV electronics.
The end result of this is increased video range.
It also sports two new BST (BlackSheep Telemetry) ports which are future proofed, which means new modules
can be added at later time to extend the life and usability of the product. The on-board micro USB connector
lets you upgrade the software when new firmwares are announced. The unit is shielded to let you use it in long
range situations, e.g. for UHF.
Pilot camera and video transmitter connect to their corresponding designators on the unit - necessary cables
normally included with the camera/vtx. All connectors are plug&play, requiring no soldering to get the product
running.
The included 100A current sensor module is an ideal companion for your R/C airplane or multirotor. It senses
the current consumptions whilst the model is in operation, letting you know how much of the battery capacity
has been used. The current sensor is now digital which means it provides a very accurate read-out. It can be
calibrated from the OSD if needed, but comes pre-calibrated out of the box.
As always, the OSD provides real-time information to the pilot about the battery voltage, current consumption,
flight time and control signal/RSSI. If your setup is sporting an EzUHF 8-ch receiver (diversity or lite), the
extended link information can be displayed on the OSD.
3
