TBS Agent configuration software
We have made a special software package to interact with the TBS CORE PNP PRO. It makes upgrading the
firmware easy and configuration a blast - just point&click to change a setting.
Installation
Download the installer from
http://www.team-blacksheep.com/corepro/agent
(Windows XP/7/8, 64-bit
required) - no drivers needed to use the application, but an Internet connection is required to download the
latest firmware.
Disconnect the flight battery and any backup battery power from the unit and plug in a micro USB cable on the
right side. The software will automatically detect the unit and offer you the option to upgrade the firmware if a
newer version is available.
When the status indicator is green and says ‘Connected’, you can upgrade, downgrade or change any of the
OSD settings.
To upgrade the firmware, select the latest version from the drop-down menu and click Update. Make sure that
the current sensor and GPS module is connected. The blue light on the current sensor will start to blink rapidly,
followed by rapid blinking on the GPS module - indicating that the module is being upgraded. The process will
take about 1 minute. All previous settings are kept and reused.
19
