Configuration
When power is supplied to the system, a boot screen will display detected the video format (NTSC/PAL), any
connected BST modules and the battery type (2S-6S). The battery type detection is only available if the voltage
warning is set to Auto.
Configuring and calibrating the TBS CORE PNP PRO is incredibly simple. Either use our TBS Agent software
which interacts with the the unit via USB, or use the built-in OSD configuration menu. To use the OSD menu,
power up your FPV system and hold the ENTER-button for 3 seconds to bring up the OSD menu. It is easily
navigated using the up-, down- and enter buttons.
The configuration menu is laid out in groups where each section has specific settings and calibration steps. The
default value is listed as the first option in the following pages.
16
