TBB Energier Pro CF2060L, Руководство пользователя

Страница: 57 / 60

Energier pro User Manual
50
9.2.2 Battery SOC bar
Battery SOC bar
from bottom to top representing Bulk, Absorption, 75% SOC, Float (100% SOC)
Following please find frequent common failure which no maintenance on Energier pro Inverter Charger Combination was needed.
from bottom to top representing 25%-50%-75%-100% battery SOC
Status of Charger
Status of Inverter
9.2.3 Load percentage bar
9.3 Common failure analysis
Phenomenon 1
：
No output at inverter mode, No alarm.
Reason
：
Battery low voltage.
Solution
：
Check battery voltage; Check battery capacity; Check battery LVD setting.
Phenomenon 2
：
No output at inverter mode, No alarm, Burn smell.
Reason
：
DC input reverse polarity.
Solution
：
Replace PCB.
9.3.1 No output first power on
Phenomenon 4
：
No output, fault and overload lights illuminate.
Reason
：
Overload shutdown.
Solution
：
Reducing load and switch on again.
Phenomenon 1
：
No output at inverter mode upon load switch on, fault and power saving mode lights illuminate.
Reason
：
Battery low voltage.
Solution
：
Check battery voltage; Check battery capacity; Check battery LVD setting.
Phenomenon 2
：
No output, long beep, fault and inverter lights illuminate.
Reason
：
Output shortcut .
Solution
：
Remove output shortcut.
Phenomenon 3
：
No output, fault and charging lights illuminate.
Reason
：
High DC voltage.
Solution
：
Check DC voltage .
9.3.2 No output during operation
Load percentage bar
representing 25%-50%-75%-100% of max preset charging power
representing 25%-50%-75%-100% load percentage of inverter
Status of Charger
Status of Inverter