TBB Energier Pro CF2060L, Руководство пользователя

Страница: 49 / 60

Energier pro User Manual
42
You can set Energier pro Inverter Charger Combination working in power save mode, in which the status consumption power can
be dramatically reduced.
Upon Energier pro Inverter Charger Combination being set in this mode, Power Save mode LED on front panel will illuminate.
On remote, upon Energier pro Inverter Charger Combination enter into power saving, the Inverter LED on remote will flash. After
resume normal output, it will illuminate.
7.10 Power Saving mode
If you want to use POWER SAVE mode, you can adjust the standby level by yourself setting the entry level. The range is 0.25%-1%.
Over a period of time, the cells in flooded and OPZS batteries can develop uneven chemical states. This will result in a weak cell which
in turn can reduce the overall capacity of battery. To improve the life and performance of these non sealed batteries, Energier pro
Inverter Charger Combination includes a manual equalization program that can be used, if recommended by battery manufacturer.
Through the dip switch at central panel, you can initiate the de-sulphation program manually. Once you trigger on the EQ program,
Energier pro bInverter Charger Combination will perform de-sulphation charging.
It is strongly recommended to read this section carefully before you set the de-sulphation charging and
DO NOT leave battery unattended while performing de-sulphation.
Always check if your battery supplier recommended de-sulphation charging. Only start when it is suitable.
On front panel of Energier pro Inverter Charger Combination, you can see a switch marked
Standby Level as pictures shows on left.
Switch off all the appliances as you normally do with remote etc.
Using screw driver to slowing turn around the switch from left until you see all power goes off.
It will be the entry level of your Power Save mode.
7.11 Standby level adjustment
7.12 Performing De-sulphation Charging