Weekly Cleaning
(continued)
©McDonald’s Corporation · Australia · Planned Maintenance Manual · Revised November, 2013
Page 7 of 7
Ta
ylor Company Blended Ice Machine Model C029 -
Australia
Weekly
BE 22 W1
46
Quickly pour one packet of
BIO-SHIELD® Beverage Tower
Drain Cleaner into the
dispenser.
Immediately replace and
tighten the cap.
Close the pressure relief knob
on the top of the dispenser by
turning the knob clockwise.
Shake the dispenser to
dissolve the cleaner.
Drain Cleaner
47
Carefully purge a small
amount of solution from the
dispenser into the back sink.
This helps prevent
“sputtering” of solution and
possible splashing back onto
clothing or eyes.
Drain Cleaner
48
Carefully spray 1/4 of the
solution into the blender/
dispensing area drain hole.
49
Carefully spray the remaining
solution into the rinser sink
drain hole.
50
Open the pressure relief knob
on the top of the BIO-SHIELD®
dispenser by turning the knob
counter-clockwise.
51
Remove the cap from the BIO-
SHIELD® dispenser.
52
Rinse the BIO-SHIELD®
dispenser.
Rinse the BIO-SHIELD®
dispenser with warm water
and return the dispenser to the
proper storage area.
IMPORTANT! Do not use
the drain for four hours
after performing the weekly
cleaning.
IMPORTANT! Do not
calibrate for at least two
hours after performing the
weekly cleaning.
weekly cleaning
next
complete
