Weekly Cleaning
(continued)
©McDonald’s Corporation · Australia · Planned Maintenance Manual · Revised November, 2013
Page 6 of 7
Ta
ylor Company Blended Ice Machine Model C029 -
Australia
Weekly
BE 22 W1
37
Remove rinse station
assembly. Clean and sanitize
rinser head and rinse station.
Using the squeeze bottle of
APC and the spout brush,
brush clean the rinse station.
Repeat this step, using
sanitizing solution.
APC & Sanitizing solutions
38
Re-install rinse station
assembly and flush rinse
station area.
Using the squeeze bottle of
APC, thoroughly flush
the rinse station area.
Repeat this step, using
sanitizing solution.
APC & Sanitizing solutions
39
Re-install parts.
•
Pitcher drying station
(pitcher grate, drip pan)
•
Blender pitchers
•
Lid holders
•
Whipped cream holder
and cover
•
Syrup rail
•
Skirt
40
Wipe machine clean.
Using clean, sanitized towels
and the spray bottle of
KAY-5 Sanitizer
,
wipe
down the interior of the
refrigerated cabinet including
the door gaskets, the outside
surfaces of the machine, and
the blend center.
Sanitizing solution
41
Wipe exterior of machine .
Wipe down the exterior of the
machine and the blend center,
using
KAY-5 Sanitizer
and
clean, sanitized towels.
Sanitizing solution
Drain Cleaning Procedure
42
Slowly pour two full pitchers of
warm water (from the back
sink) into the rinser sink.
IMPORTANT! Wear eye
protection before
performing the next steps.
43
Open the pressure relief knob
on the top of the BIO-SHIELD®
dispenser by turning the knob
counter-clockwise.
Drain Cleaner
44
Remove the cap from the BIO-
SHIELD® dispenser.
45
Pour two full pitchers of warm
water (from the back sink) into
the dispenser.
