Taylor-Dunn MX-026-00, Руководство по эксплуатации, обслуживанию и замене запасных частей

Страница: 19 / 192

SAFETY RULES AND OPERATING INSTRUCTIONS
Safety Rules
Page 7
VEHICLE OPERATIONAL GUIDELINES
Safety Guidelines
• Only qualified and trained operators may drive this
vehicle.
• Drive only on level surfaces or on surfaces having
an incline of no more than 10% (5.6 degrees).
• Drive slowly when making a turn, especially if the
ground is wet or when driving on an incline.
• This vehicle may overturn easily if turned sharply or
when driven at high speeds.
• Observe all traffic regulations and speed limits.
• Keep all body parts (head, arms, legs) inside this
vehicle while it is moving.
• All occupants to remain seated while the vehicle is
in motion.
• Keep the vehicle under control at all times.
• Yield right of way to pedestrians, ambulances, fire
trucks, or other vehicles in emergencies.
• Do not overtake another vehicle at intersections,
blind spots, or other dangerous locations.
• Do not drive over loose objects, holes, or bumps.
• Yield right of way to pedestrians and emergencies
vehicles.
• Stay in your driving lane under normal conditions,
maintaining a safe distance from all objects.
• Keep a clear view ahead at all times.
Starting:
1. Place shift lever is in the center “OFF” position.
2. Apply the foot brake.
3. Release the parking brake.
4 Turn the start switch to the “ON” position.
5. Wait 1-second then place the shift lever in the
desired direction of travel.
6. Slowly depress the accelerator pedal.
While driving:
• Slow down and sound the horn to warn pedestrians
or when approaching a corner or other intersection.
• No reckless driving.
• Do not drive this vehicle on steep inclines or where
prohibited.
• Allow for longer stopping distances when driving
down a grade.
• Immediately report any accidents or vehicle
problems to your supervisor.
• Use the low speed model while towing heavy loads.
While towing heavy loads, the low speed mode will
increase the efficiency of the system and extend
running time between charges.
• Do not carry more than the maximum number of
passengers allowed for this vehicle.
Changing Directions:
Reversing the direction of an electric vehicle while still in
motion is called “plugging” or “plug braking.”
This vehicle is equipped with dynamic plug braking
which allows reversing direction of the vehicle while still
in motion.
When reversing direction while the vehicle is in motion,
the control system will send reverse current to the drive
motor and smoothly slow to a stop then accelerate in the
opposite direction.
Do not rely on plug braking to stop quickly such as in
an emergency.
Towing Loads
• Do not exceed the towing capacity of the vehicle.
• Do not exceed the load capacity of the trailer. Refer
to documentation supplied with your trailer for
information regarding load capacity of the trailer.
• Make sure all loads are securely tied down. Refer
to documentation supplied with your trailer for
information regarding attaching loads to the trailer.
• Do not back up when towing more than one trailer.
• Drive slowly when towing loads with a high center
of gravity.
• When turning, be sure to allow for “corner cutting”
of the trailer.
• Allow for longer stopping distances when towing
heavy loads.