Taylor-Dunn G0-010-00, Инструкция по обслуживанию и замене запасных частей, Страница: 42 / 362

2.18
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
3. Open the hood and slowly open the radiator
pressure cap to relieve system pressure.
WARNING
Never remove the pressure cap when the engine is
warm or hot. Escaping steam can cause severe burns.
The engine must be cool before removing the pressure
cap.
4. Open the drain valve
q
on the front side of the
radiator and allow the coolant to completely drain.
Properly dispose of the used coolant.
5. Remove the screws that retain the recovery bottle to
the frame bracket. Set the recovery bottle out of the
way.
6. Remove the upper and lower coolant lines from the
radiator.
7. Remove the recovery bottle return line.
8. Remove the two mounting screws
w
that secure the
upper portion of the radiator to the frame.
9. Carefully lift the radiator straight up and out of the
vehicle. Take care not to damage the cooling fins.
10. Remove the four bolts that retain the fan motor and
shroud to the radiator.
MAINTENANCE