tayco Halifax, Руководство по установке

Страница: 8 / 55

AV Unit Mounted Video Table w/ V-Leg
8540-0789_SCREW
Drill Robertson # 2 #10 X 1" Pan Head
Screw
1.
Place the worksurface on a
clean, solid surface or floor
with the underside facing
up.
2.
Position the V-leg on
underside of worksurface.
Attach the V-Leg by
inserting (18) #10 x 1" Pan
Head Screws into the pre-
drilled holes and tighten,
(Figure 1).
3.
Repeat Step 2 to fasten
remaining V-leg.
4.
Position the Table Support
Beam on underside of
worksurface using the pre-
drilled positioning holes.
Attach the Table Support
Beam to worksurface
using the #10 x 1" Pan
Head Screws, (Figure 2).
Continued on the next page >>
WORKSURFACE
V-LEG
TABLE SUPPORT BEAM
1
2
3
1
3
Pilot Hole
Pre-drilled holes
2
1
2
Figure 1
Figure 2
May 2023 halifax 8