Taurus TF-ERGO-X, Руководство по сборке и эксплуатации

Страница: 8 / 44

ERGO X
8
2.2 Faults and troubleshooting
The equipment runs through regular quality controls during production. Nevertheless, errors
or malfunctions on the equipment may occur. Individual parts are often the cause of faults and
replacement is usually sufficient. Please use the following overview to see the five most common
errors and how to repair them. If the equipment still does not work properly, please contact your
contract partner.
Problem Cause Solution
Crackling noise in pedal area Loose pedals Tighten the pedals
Equipment wobbles Equipment is not level Adjust the supporting feet
Handlebar/saddle wobbles
Screws are loose Tighten screws
Display does not turn on
Power is disconnected Check all plug connections and see
if the plug is plugged in
No pulse reading
• Sources of interference in the
room
• Using a chest strap:
- Unsuitable chest strap
- Chest strap is incorrectly
positioned
- Batteries are empty
• Eliminate sources of interference (e.
g. mobile phone, loudspeaker, etc.)
• Use a suitable chest strap (see
recommended accessories)
• Reposition the chest strap and/or
moisten the electrodes
• Charge the batteries
2.3 Maintenance and service calendar
The following routine work must be done in the specified time intervals:
Part Weekly Monthly Twice a year
Display console C I
Tighten the pedals I
Plastic cover C I
Legends: C = cleaning; I = inspect