![background image](http://html1.mh-extra.com/html/taurus/ergo-x/ergo-x_assembly-and-operating-instructions-manual_3751164012.webp)
USE TOOL
6m/m
J6
PAPER TUBE
B
J6
A
J6
PAPER TUBE
STEP 1
USE TOOL
6m/m
C
J6
A
ERGO
X
12
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
Assembly of front stabilizer
1. Loosen both screws (J6)
from the cardboard roll.
The paper tube serves
as packaging protection
and is not required for or
after the assembly.
2. Mount the front stabilizer
(B) with the screw (J6) on
the main frame (A). Screw
the adjusting screws in
or out to compensate
potential unevenness of
the floor.
Step 2:
Assembly of rear stabilizer
1. Loosen both screws (J6) from the paper tube. The cardboard roll serves as packaging protection
and is not required for or after the assembly.
2. Mount the rear stabilizer (C) with the screw (J6) on the main frame (A).
Содержание Ergo-X
Страница 2: ...ERGO X 2...
Страница 21: ...21 Fig 8 Fig 12 Fig 9 Fig 13 Fig 10 Fig 14 Fig 11 Fig 15 Fig 16 Fig 17...
Страница 44: ...Exercise bike ERGO X...