USE TOOL
F
F1
E1
E
J4
J3
USE TOOL
5m/m 4m/m
#13 #17
D2
I
J2
J5
A17
ERGO
X
15
Step 8:
Alignment of the feet
If the floor is uneven, you can stabilize the equipment by
turning the setting screws under the main frame.
1. Lift the equipment on the desired side and rotate the
setting screws under the main frame.
2. Rotate the screws clockwise in order to remove them and
to raise the equipment.
3. Rotate them counterclockwise in order to lower the
equipment.
Step 7:
Assembly of the console
1. Remove the pre-mounted
screws from the console case
(F).
2. Connect the cable (E1) with
the cable of the console (F).
L
NOTICE
Make sure that there are four
AA batteries in the battery
compartment. To change the
batteries, see chapter 2.4.2.
3. Mount the console with the
screw (F1) on the upright
post (E).
Содержание Ergo-X
Страница 2: ...ERGO X 2...
Страница 21: ...21 Fig 8 Fig 12 Fig 9 Fig 13 Fig 10 Fig 14 Fig 11 Fig 15 Fig 16 Fig 17...
Страница 44: ...Exercise bike ERGO X...
