22
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
ROAT² 1700 / ROAT² 3400 / ROAT² 3400 TL
Set-up instructions
NOTE The contact surface between the hub and the bar shall not be smaller than 1/3 of
the total length.
Cardan shaft assembly
Observe the internal forks alignment
Garfos internos desalinhados
Correct assembly
Correct assembly
Unaligned internal forks
Incorrect assembly
Incorrect assembly
1/3
1/3
2/3
2/3
When assembling the cardan shaft, it is necessary to be careful and leave the terminals
on both ends aligned. The discrepancy of the terminals in 90° will cause vibrations and a
greater wear on the universal joints, reducing the lifetime of the set.
