26
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
ROAT² 1700 / ROAT² 3400 / ROAT² 3400 TL
Set-up instructions
For hitching, choose a place as flat as possible.
Drive the tractor slowly in reverse gear and be ready to brake. When close enough,
use the lever to control the hydraulic position and leave the left lower arm on the same
level as the rotary cutter hitch pin.
1) Hitch the right and left arms that have up and down movements through the arm
adjustment and place the lock pins. By doing so, the extension thread of the upper arm
can be used to approach or move away the equipment, thus facilitating hitching.
2) Place the upper arm (three-point hitch) and lock using a lock pin. For a perfect
hitching, the equipment must be centralized with the tractor, which is done as follows:
• Align the equipment drawbar with the tractor three-point hitch.
• Totally lift the equipment.
• Check if the distances between the lower arms and the tires are equal on both sides
(as in "A"), being them leveled. (as in "B").
Procedures for longitudinal transportation
"B"
"B"
"A"
"A"
Leveling on
Leveling on
the length
the length
Adjuster
Adjuster
Hydraulic
Hydraulic
upper arm
upper arm
Hydraulic
Hydraulic
lower arm
lower arm
Leveling on
Leveling on
the width
the width
NOTE • Never adjust the lower hydraulic arms when the rotary cutter is lowered.
