manualshive.com logo in svg

Tatu Marchesan GAPCW-EP, Руководство оператора

Поделиться
Скачать
Tatu Marchesan GAPCW-EP Скачать руководство пользователя страница 52

50

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

GAPCW - EP

Adjustments and operations

Operations - important points

• To carry out any verification on the equipment, lower it to the ground and shut 

down the tractor engine.

• Whenever unhitching the equipment, either in the field or shed, do it on a flat 

and firm place and use the jacks. Make sure that the equipment is properly 

supported.

• Carry out the operations with a controlled and careful manner.

• During work, do not maneuver without lifting the equipment entirely, as the angle 

formed by the disc gangs would start to transmit great effort to the equipment, 

thus overloading the traction components.

• The harrow activation to open or close the gangs must be done gradually, being 

the tractor in movement.

• Relieve the control valve pressure before disconnecting the quick couplers and 

when doing any verification in the hydraulic circuit or on the retention valve.

• Do not check eventual leaks using your bare hands, as the high pressure may 

cause body injury. Use a cardboard or any other suitable object instead.

• As previously mentioned, this disk harrow has several settings. However, only 

the local conditions can determine its best adjustment.

Содержание GAPCW-EP



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды