manualshive.com logo in svg

Tatu Marchesan GAPCW-EP, Руководство оператора

Поделиться
Скачать
Tatu Marchesan GAPCW-EP Скачать руководство пользователя страница 22

20

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

GAPCW - EP

Grease fitting 

Grease fitting 

or plug

or plug

Assembly

Disc gangs assembly sequence

• Place the outer washer (A) along with the axle (B).
• Tighten the nut (C) passing 5 mm from the axle face.
• Place the disc blades (D), bearings (E) and spacer spools (F) following the 

instructions on the previous page.

• Place the inner washer (G) and the other nut (C1).
• Place the bolt (H) that fasten the lock nut (I) along with a spring washer and nut 

(only on the outer side of the gangs).

• Use the wrenches from the 'set of wrenches' page to tighten the gangs as follows:
1) Place one of the wrenches on the outer side of the gangs (locked side), supporting 

it on the ground (as shown on the next page).

2) On the inner side, use the other wrench and tighten the gangs to get maximum 

torque.

3) To tighten the gangs, underpin them with a piece of wood or another object, 

preventing them from moving (as shown on the next page).

• Lastly, place the bolt (H1) and position the lock nut (I1), fastening with a spring 

washer and nut.

IMPORTANT

• Check the correct side of the bearings and spacer spools according 

to the concavity of the disc blades.

Содержание GAPCW-EP



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды