manualshive.com logo in svg

Tatu Marchesan GAPCW-EP, Руководство оператора

Поделиться
Скачать
Tatu Marchesan GAPCW-EP Скачать руководство пользователя страница 40

38

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

GAPCW - EP

Set-up instructions

• Couple the hoses (G) that activate the wheelsets to the quick couplers of the tractor. 

To do so, shut down the engine, relieve the control valve pressure by activating the lever 

a couple of times and check if the couplers are clean.

• Remove the pins (H) from the wheelset locks (I). If necessary, activate the hydraulic 

command slightly to relieve the pins from the holes and to facilitate their removal. Fasten 

the pins (H) to the safety locks on the hole (J).

• Activate the hydraulic command to lower the tires and to lift the harrow.

• Before activating the hydraulic command to lower or to lift the tires, 

always check if there are no people or animals close to the harrow, 

especially near the drawbar, which will be articulated before the tires.

• Do not allow the approximation of people or animals.

G

G

H

H

J

J

I

I

Tractor 

Tractor 

PTO

PTO

Содержание GAPCW-EP



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды