manualshive.com logo in svg

Tatu Marchesan GAPCW-EP, Руководство оператора

Поделиться
Скачать
Tatu Marchesan GAPCW-EP Скачать руководство пользователя страница 42

40

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

GAPCW - EP

Hitching to the tractor to operate the harrow

Being the harrow in transport position and already at the working place, proceed as 

follows:

• Relieve and remove the safety locks from the three cylinders (wheelsets and drawbar) 

and fasten them to the respective unused spots.

• Lower the harrow until the tires are totally lifted.
• Place the pins (A) to the safety locks (B) and keep the wheelsets lifted.
• Relieve the hydraulic control valve of the tractor and uncouple the hoses from the 

quick couplers.

• Uncouple the transport hitch (C) using a pin and cotter pin with the harrow.
• Couple the harrow clevis hitch (D) to the tractor drawbar.
• Couple the opening cylinder hoses to the tractor quick couplers.
• Unlock the frame by removing the pin (E) and placing the pin on the hole (F).
• Position the jack (G) on the unused spot.

Set-up instructions

ATTENTION To operate on normal soils, the tractor drawbar must be fixed on the 

central position.
The tractor drawbar may oscillate when working on hard soils.

E

E

F

F

A

A

B

B

C

C

G

G

D

D

Содержание GAPCW-EP



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды