Tatu Marchesan GAPCW-EP Скачать руководство пользователя страница 51

Страница: 51 / 66

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

GAPCW - EP

Adjustments and operations

Operations - important points

• Retighten nuts and bolts after the first day of work and check the conditions

of all pins and cotter pins. Then, retighten every 24 operating hours.

• Carefully observe the lubrication intervals.

• Special attention should be given to the disc gangs, retightening daily during

the first week of use. Then, retighten periodically.

• Choose a gear that allows the tractor to maintain a certain power reserve,

ensuring against unforeseen efforts.

• Always inflate the tires with the aid of a contention device (tire inflation cage).

• The correct tire inflation is important; keep the same pressure on every tire.

(check the 'tires inflation' page on the 'maintenance' section).

• Speed is relative to the tractor gear and can only be determined by local

conditions. We adopted an average 5 to 7 km/h, which is not advisable to

overcome, to maintain service efficiency and to avoid possible damages to

the equipment.

• It is important to keep a constant speed during the whole operation.

• Only people who own a complete knowledge of the tractor and equipment

must operate them.

• Be on a wide field and maneuver on slow gear to hitch the equipment, being

ready to brake when necessary.

• Remove sticks or any object that may get stuck on the disc blades.

• The tractor drawbar must remain loose during work and transportation.

• Only pull the equipment using a tractor with enough power.

• During work or transportation, do not allow passengers on the tractor or in

the equipment.

• Always keep the equipment centralized related to the tractor and leveled

related to the soil.

Содержание GAPCW-EP



































































Результаты поиска

Содержание GAPCW-EP

Отзывы:

Бренды по названию

Популярные бренды

Tatu Marchesan GAPCW-EP, Руководство оператора

Результаты поиска

Содержание GAPCW-EP

Отзывы:

Бренды по названию

Популярные бренды