manualshive.com logo in svg

Tatu Marchesan GAPCW-EP, Руководство оператора

Поделиться
Скачать
Tatu Marchesan GAPCW-EP Скачать руководство пользователя страница 3

1

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

GAPCW - EP

Introduction

The GAPCW-EP disk harrow was designed to work in 

any kind of soil, with excellent application on the soil 

preparation for annual crops, sugar cane etc.

The heavy-duty structure with proper dimensioning is 

made of bent steel plates joined by a good penetration 

weld and fine finishing, with tough parts in the load 

concentration.

The GAPCW-EP transportation is made through an 

efficient wheelset system composed by tires and hydraulic 

cylinders, which allows long-distance transportations.

This operator's manual contains the necessary 

information for the best performance of this harrow. The 

operator must carefully read the entire manual before 

working with the equipment. Also, read and understand 

the safety recommendations.

For any further explanations or in the case of technical 

problems that may arise during the service, consult your 

dealer and the Technical Support department of the 

factory. They can fully ensure the functioning of your 

TATU disk harrow.

Содержание GAPCW-EP



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды