TATA Motors Harrier XE, Руководство пользователя

Страница: 90 / 224

DASHBOARD AND FEATURES
80
Steering Wheel Switches (RHS)
(
If equipped)
1.
Instrumentation controls(IC)
i. Instrumentation controls
scroll up
Press above switch to scroll up on In-
strument Cluster display.
ii. Instrumentation controls scroll
down
Press above switch to scroll
down on Instrument Cluster display.
2. OK / Select & long press
for setting
Press above switch to select the op-
tion and also press long (approx.
3
)
to go directly to Instrument cluster
settings.
3. Cruise resetting/setting
speed
increasing/de-
creasing switch

Press the cruise control master
switch on steering wheel.

Accelerate the vehicle to the de-
sired speed.

Press the ‘ SET ’ button on steering
wheel switch to set the desired
cruise speed. The cruise control in-
dicator on instrument cluster will
turn ‘ON’.

Remove your foot from the acceler-
ator pedal.
Once Cruise control is activated the ve-
hicle automatically maintains the stored
speed.
Changing the set cruise
speed
The set cruise speed can be adjusted
(i.e. increased or decreased) using ‘+’ (to
in crease) or ‘ - ’ (to decrease) switches on
steering wheel. The speed increases and
decreases on a single press. The
changed speed will be shown on the
speedometer. Keeping the switch
pressed increases or decreases the
speed continuously till the switch is re-
leased. The set speed can also be in-
creased by pressing the accelerator pe-
dal till the desired speed is achieved and
then pressing the
‘ SET ’ button. The set
speed can also be decreased by press-
ing the brake pedal (The cruise indicator
will turn OFF) and slowing down to de-
sired speed and then pressing the
‘ SET ’
button (The cruise control indicator will
turn
‘ ON ’ again).