TATA Motors Harrier XE, Руководство пользователя

Страница: 137 / 224

STARTING AND DRIVING
127
NOTE

Gear recommendation is dis-
played when the clutch pedal is
in fully released position.

If “F” is displayed in DIS of instru-
ment cluster, it means ‘Fault’
condition. Contact the TATA MO-
TORS Authorized Service Centre.

Press the clutch fully while shift-
ing the gear. The reverse gear
should be engaged only when
the vehicle is stationary. Wait for
5 seconds after declutching to
ensure smooth engagement of
the reverse gear.

Do not press clutch pedal while
driving the vehicle or when sta-
tionary on a slope
WARNING

Do not switch off the ignition
while driving.

If you switch off the ignition while
driving, safety-relevant functions
are only available with limita-
tions, or not at all. This could af-
fect the power steering and the
brake boosting effect. You will re-
quire considerably more effort to
steer and brake. There is a risk of
an accident.
NOTE
You may notice a noise from trans-
mission under certain circum-
stances. This noise is normal and
is not an indication of a problem
with your clutch or transmission.
This noise may be noticed when
vehicle is idling in NEUTRAL condi-
tion with the clutch engaged
(clutch pedal released) or when
the transmission is warm. It may
also be heard while driving.
NOTE

Your vehicle is equipped with
Dual Mass Flywheel (DMF),
which plays important role in
providing refined powertrain /
driveline experience.

Driving at very low engine speed
is likely to stall the engine, espe-
cially when driven without any ac-
celerator pedal inputs.
Recommended driving precautions:

Shift to lower gear as per gear-
shift indicator (GSI) on cluster.

To start-off (marching/ drive
away), always engage in first
gear.
 While down shifting (from
3
rd
to
2
nd
gear) at low engine RPM’s
(below
1000
rpm) press accelera-
tor pedal to provide required
rpm.