TATA Motors Harrier XE, Руководство пользователя

Страница: 131 / 224

STARTING AND DRIVING
121
Steering lock cum ignition switch
(If applicable)
The ignition switch has the following four
positions:
LOCK -
This is the normal parking posi-
tion. Key from lock can be removed in
this position only.
“LOCK” position prevents normal use of
the steering wheel after the key is re-
moved.
To release the steering lock, insert the
key and turn it clockwise to one of the
other positions.
ACC -
Accessories such as the infotain-
ment system can be operated, but the
engine remains ‘OFF’. Steering gets un-
locked.
ON -
This is the normal operating posi-
tion. All electrical systems are ‘ON’.
START -
Turn the key further clockwise
to the START position, (spring loaded) to
start the engine. As soon as the engine
starts, release the ignition key, which re-
turns to ON position. While cranking, all
accessorie
s will be momentarily ‘OFF’.
Illuminated Key Ring (if equipped)
When the vehicle is unlocked, the illumi-
nated key ring glows up. This helps to lo-
cate ignition switch in the dark.
NOTE
The engine can only be started
wh
en the gearshift lever is in “N”
position with the clutch pedal
firmly pressed.
Starting and stopping (without
PEPS)
Starting the Engine
Make sure that parking brake is en-
gaged and vehicle is in neutral gear.
Press the clutch pedal fully and crank
the engine. Do not press the accelerator
pedal while starting the engine.
NOTE
The Starter protection sys-
tem fitted in this vehicle
does not allow you to crank
the engine until you fully
press the clutch pedal.
Release the key as soon as the engine
starts. Repeat if engine does not start.
NOTE
The Starter protection system
switches off the starter when it is
continuously cranked for more
than
10
secs. In such a case, get
the key back to ‘OFF’ position &
wait for
30
secs.