TATA Motors Harrier XE, Руководство пользователя

Страница: 82 / 224

DASHBOARD AND FEATURES
72
Warning Lamps Color Indicator Remarks
Speed limit warning
indicator
Amber
Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ after
4
Seconds.
When the vehicle speed cross
80
km/hrs. then Speed limit Warning indicator
turn ‘ON’ along with for every 2 minute chime shall be sounded (Audible warn-
ing).
If vehicle speed crosses
120
km/hrs. then along with Speed limit Warning In-
dicator, Chime will start continuously ON till the vehicle speed is above
120
km/hr.
If vehicle speed is between 80 km/hrs. to
120
km/hrs. then chime will be-
come less frequent but Speed Limit warning Indicator will remains ‘ON’ con-
tinuously. When the vehicle speed is reduce below
80
km/hrs. then Speed
limit Warning Indicator along with chime will gets turns ‘OFF’.
DPF Lamp
Amber
The warning light or symbol switches on constantly to indicate that the DPF
needs to eliminate the trapped pollutants (particulate matter) through the re-
generation process, it therefore does not indicate a malfunction. The warning
light or symbol remain off during the entire DPF regeneration and light up only
when driving conditions require the driver to be notified. To switch off the
warning light or symbol, keep the car running until regeneration is complete
(ideally at 3
rd
gear,
60
km/hr. with engine speed over
2000
rpm). The process
normally takes about
20
minutes.
Note: Failure to be observed the appropriate procedure for a long distance
when the DPF warning light comes ON, can cause the warning light (MIL) to
come ON. In that case, please contact nearest TATA authorized service center
to restore correct DPF operation.