TATA Motors Harrier XE, Руководство пользователя

Страница: 132 / 224

STARTING AND DRIVING
122
WARNING
The engine emits poisonous ex-
haust gases such as carbon mon-
oxide. Inhaling these exhaust
gases leads to poisoning. There is
a risk of fatal injury. Therefore,
never leave the engine running in
enclosed spaces without sufficient
ventilation.
NOTE
After starting, run the engine in
idle speed for at least
30
seconds.
Do not press accelerated pedal
while starting the engine to avoid
damage to turbocharger.
Stopping the Engine
Turn the key to ‘ACC’ position to switch
off the engine. Before switching off the
engine, run the engine in idle condition
for at least
30
seconds and then switch
off. This will allow the engine oil to lubri-
cate the turbocharger, till its speed is
fully reduced and also allow the unit to
cool down.
WARNING

A quick burst on the accelerator
before turning off the engine
serves no practical purpose, it
wastes fuel and can damage tur-
bocharger.

Do not switch off the engine
when it is running at high speed.
This will lead to premature turbo-
charger bearing wear.
Starting and stopping (PEPS)
(If equipped)
Engine Passive Start/Stop
Start/Stop switch is provided on the
dashboard towards the right side of
steering wheel.
Start / Stop Switch
A Start Stop Switch (SSSW) or Push to
Start Button is a main component of Pas-
sive (Engine) Start and Stop system. It is
used to control ACC, IGN outputs as well
as to start and stop the engine.