TATA Motors ALTROZ BS VI 2021, Руководство пользователя

Страница: 223 / 248

CAR CARE
Your vehicle is subjected to many external
influences such as climate, road condi-
tions, industrial pollution and proximity to
the sea. These conditions demand regular
care of the vehicle body. Dirt, insects, bird
droppings, oil, grease, fuel and stone chip-
pings should be removed as soon as pos-
sible.
Washing
Following these tips while washing your
vehicle.
Always wash your vehicle in shade and
the surface is at room temperature.
Wash with mild vehicle wash soap like
‘Car Shampoo’ and use a soft bristle
brush, sponge or soft cloth and rinse it fre-
quently while washing to avoid scratches.
To avoid scratches, please wear soft
gloves. Remove finger rings, nails, wrist
watch while washing.
To remove stubborn stains and contami-
nants like tar, use turpentine or cleaners
like ‘Stain remover’ which are safe for
paint surfaces.
Avoid substances like petrol, diesel,
kerosene, benzene, thinner, ac-ids or
other solvents that cause damage to paint.
Dry your vehicle thoroughly to pre-vent
any damp spots.
Rinse all surfaces thoroughly to prevent
any traces of soap and other cleaners as
this may lead to the formation of stains on
the painted surface later.
After drying the vehicle, inspect it for chips
and scratches that could allow corrosion
to start. Apply touch up paint where nec-
essary.
Cleaning of Carpets
Vacuum clean the carpet regularly to re-
move dirt. Dirt will make the carpet wear
out faster. Periodically, shampoo the car-
pet to keep it looking new.
Use carpet cleaners (preferably foam
type). Follow the instructions that come
with the cleaner. Apply it with a sponge or
soft brush. Keep the carpeting as dry as
possible by not adding water to the foam.
NOTE
Avoid parking the car under trees with-
out proper cover, it will reduce the
amount of bird droppings, tree sap and
pollen contact on paint surface. Regu-
larly remove the twigs, leaves and veg-
etation near the windshield areas, to
avoid water stagnation.
WARNING
Do not direct high pressure washer
fluid/ water jets (Pres-sure above 0.5
bar) at electrical devices and connecter
during washing. This is to prevent mal-
function / failure of electrical sys-tem
due to water ingress.
VEHICLE CARE AND VALUE ADDED SERVICES
215