TATA Motors ALTROZ BS VI 2021, Руководство пользователя

Страница: 187 / 248

Head Lamp Bulb Replacement
Replacing The Low Beam Bulb
Lift the bonnet to access the bulbs. 1.
Remove the Bulb Access cover by ro- 2.
tating as per the direction arrow shown
on the cover.
Press the pin and pull the connector
3.
from the bulb.
To free the headlamp bulb from the
4.
socket, press and swing the retaining
spring and pull it straight back.
Pull out the bulb from the socket.
5.
Insert the new bulb (without touching 6.
the glass) into the socket.
Move the retaining spring up and push 7.
it slightly until it locks properly.
Refit the connector in to the Bulb & ro-
8.
tate the Bulb Access Cover as per the
direction arrow shown on the cover.
WARNING
Do not run the engine when you •
change bulbs.
If the engine has been running just
•
prior to replacing bulbs in the head-
light housing, please keep in mind
that components in the engine com-
partment will be hot.
NOTE
Your vehicle’s headlamps have replace-
able halogen bulbs.
WARNING
It is dangerous if a halogen bulb •
breaks. These bulbs contain pres-
surized gas and if broken, will ex-
plode causing serious in-jury by the
flying glass.
Halogen bulbs can break if the glass
•
portion is touched with bare hands,
body oil could cause the bulb to
heat unevenly and explode when lit.
Never touch the glass portion of the
•
bulb with your bare hands and al-
ways wear eye protection when
handling or working around halogen
bulbs. Always keep halogen bulbs
out of the reach of children.
EMERGENCY AND BREAKDOWN ASSISTANCE
179