TATA Motors ALTROZ BS VI 2021, Руководство пользователя

Страница: 154 / 248

146
Reverse Park Assist Limitations
Reverse Park Assist system is not a colli-
sion avoiding system. It is solely the
driver’s responsibility to park the vehicle
safely.
Reverse Park Assist feature works on ultra
sound echo technology, due to which per-
formance is not guaranteed in following
scenarios:
If the object has a sharp edge sur-face, •
where surface may divert echoes from
sensor reception.
If object is mesh fence made up of thin
•
wires, where echoes can’t be given by
the surface.
Fast moving objects passes in the sen-
•
sor’s field of detection, where echoes
are not processed by the system.
If object is made/covered by foam or
•
sponge or snow where ultrasonic
sound signals are absorbed.
Objects close to the rear bumper can
•
go undetected by the Reverse Park
Assist’s field of detection. Driver
should use extreme caution while
parking the vehicle.
If height of the bumper is changed due
•
to alteration to the suspension or other
causes
If the sensor areas are extremely hot
•
from direct sunlight or cold due to
freezing weather.
If Sensors are covered by a hand,
•
sticker, accessory, etc.
If ultrasonic noise is present around
•
Vehicle due to other vehicle sensors,
horn, engine, air braking system (large
vehicles), Exhaust Fans, Wireless
transmitters or mobile phones
If the vehicle speed exceeds 10kmph,
•
the system will not warn you even
though objects are detected, error
message ‘Vehicle Speed is high, drive
slowly!’ will appear.
Driving on uneven road surfaces e.g.
•
Gravel, unpaved roads, Artificial Speed
Breakers, or gradient.
Reverse Park Assist System Preven-
tive Maintenance
Regularly clean the sensors and keep •
them free from dust, ice, mud, water,
chewing gum etc. for proper working of
the system. Use a smooth cloth for
cleaning.
Do not use water at high pressure for
•
cleaning the sensor or camera.
Do not cover the sensors surface with
•
any additional fitment. This will inter-
rupt park assist performance.
WARNING
Due to any reason, if the sensor gets
misaligned or loses its intended fitment
position, contact your dealer for refit-
ment.
NOTE
Turning the ignition ‘OFF’ ‘while the park
assist feature is active would disable it.
STARTING AND DRIVING