TATA Motors ALTROZ BS VI 2021, Руководство пользователя

Страница: 142 / 248

134
GEAR SHIFTING
The gearshift pattern is as shown on the
gear lever knob. Gear shifting should al-
ways be done with the clutch pedal fully
pressed.
REVERSE GEAR
To engage reverse gear, shift to re-verse
position as shown on the gear lever knob.
NOTE
Gear recommendation is displayed •
when the clutch pedal is fully re-
leased.
If “F” is displayed in DIS of instru- •
ment cluster, it means ‘Fault’ condi-
tion. Contact TATA MOTORS
Authorized Dealer/Service Center.
Press the clutch fully when gear •
shifting. The reverse gear should be
engaged only when the vehicle is
stationary.
Use the clutch only to shift gears •
and do not use it when vehicle is
stationary on a slope, as the car will
roll down due to gravity.
If all doors are closed when the ve- •
hicle is in ACC/IGN/RUN mode and
if PEPS does not detect the smart
key inside the car, then an audio
warning is given.
Do not rest your hand on the shift •
lever during driving; Pressure trans-
mitted from your hand may result in
premature wear of the transaxle in-
ternal gear shift mechanism.
STARTING AND DRIVING