TATA Motors ALTROZ BS VI 2021, Руководство пользователя

Страница: 165 / 248

Jack Up Point Location on Vehicle
Jack up point location
Jacking point location
Continue to raise the jack slowly and
smoothly until the tyre clears the ground.
Do not raise the vehicle more than re-
quired.
Lifting the front wheel using jack
Lifting the rear wheel
Remove wheel nuts with the help of wheel
spanner and take out flat tyre.
Roll the spare wheel into position and align
the holes in the wheel studs.
Tighten each nut by hand until the wheel
is securely seated on the hub.
Lower the jack completely then tighten the
wheel nuts one by one using wheel span-
WARNING
If you do not position the jack correctly
at the appropriate jacking point of the
vehicle, the jack could tip over with the
vehicle raised. There is a risk of injury.
Al-so jack can be damaged.
NOTE
Do not place wheel nuts in sand or on a
dirty surface. Do not apply oil or grease
on it.
EMERGENCY AND BREAKDOWN ASSISTANCE
157