Tascam DP-32 Digital Portastudio Скачать руководство пользователя страница 31

Страница: 31 / 104

TASCAM DP-32

4 – Preparation

Inserting and removing SD cards

Inserting an SD card

Insert the SD card into the SD card slot on the rear panel

as shown in the illustration until it clicks into place.

NOTE

An SD card is already in the SD card slot when the unit is

shipped from the factory. If you want to use this card to

record and play tracks, there is no need to reinsert it.

Removing the card

Push the loaded card in gently to eject it.

CAUTION

• Always turn the power off (put in standby) before

removing an SD card.

• If you remove or insert an SD card when the power is

on, recorded data could be lost permanently.

• SD and SDHC cards that are at least 512 MB in size

can be used.

• A list of SD cards that have been confirmed to work

with this unit can be found on the TASCAM website

(

http://tascam.com/

About write-protected SD cards

SD cards have write-protect (lock) switches.

Unprotected

Protected

When the protect switch is in the LOCK position, files

cannot be recorded or edited on the card. Slide the switch

away from the LOCK position if you want to record, erase

or otherwise change files on a card.

Powering the unit

As shown in the illustration, connect the included TASCAM

PS-1225L AC adaptor to the DC IN 12V jack.

TASCAM

PS-1225L

The bottom panel has a hook (cord holder) that can be

used to hold the AC adaptor cord in place. When using it,

wrap the cord around this hook to prevent it from being

disconnected during use.

CAUTION

• Use only the included TASCAM PS-1225L AC adaptor

and power cord. Use of a different AC adaptor could

cause malfunction, fire or electric shock.

• Be sure to use the included TASCAM PS-1225L AC

adaptor to supply power to this unit. Power cannot

be supplied to this unit by USB.

AC outlet

DC plug

Содержание DP-32 Digital Portastudio









































































































Результаты поиска

Содержание DP-32 Digital Portastudio

Отзывы:

Похожие инструкции для DP-32 Digital Portastudio

Бренды по названию

Популярные бренды

Tascam DP-32 Digital Portastudio, Руководство пользователя

Результаты поиска

Содержание DP-32 Digital Portastudio

Отзывы:

Похожие инструкции для DP-32 Digital Portastudio

Бренды по названию

Популярные бренды