Tascam DP-32 Digital Portastudio Скачать руководство пользователя страница 74

Страница: 74 / 104

TASCAM DP-32

12 - SD Card Management

The recording files are stored on SD cards.
Depending on the capacity of the SD card, the card is

formatted using the FAT16 or FAT32 file system.

SD card capacity File system

512 MB to 2 GB

FAT16

Above 2 GB

FAT32

Moreover, this unit is compatible with SD card write-

protection, so you can write-protect your cards to prevent

accidental deletion by formatting them. (See "About

write-protected SD cards" on page 31.)
When an SD card is inserted, the unit mounts the card

and enables it for use. At this time, if the inserted SD card

has not been formatted by this unit, a message appears

prompting you to format it.
If the inserted SD card has no setup file on it, a message

appears prompting you to create a setup file.
When an SD card is ejected, the unit unmounts it and

then a No Card message appears.

CAUTION

• Ejection during recording is not supported.
• Formatting cannot be undone.

NOTE

• The FAT (File Allocation Table) format is a file system

format that can be read by a computer.

• SD and SDHC cards that are at least 512MB in size can be

used.

A list of SD cards that have been confirmed to work

with this unit can be found on the TASCAM website

(http://tascam.com/).

Quick formatting an SD card

Use the

QUICK FORMAT

item to quickly format an SD

card. Using QUICK FORMAT erases all files on the card and

automatically creates new

MUSIC

UTILITY

and

AudioDepot

folders, as well as the

dp-24.sys

file that is necessary to use

the card with this unit.

CAUTION

This operation erases all data from the SD card and

cannot be undone. Confirm that you will not lose

important data before quick formatting a card.

1. When the recorder is stopped, press the MENU

button to open the

screen.

2. Use the JOG/DATA dial or the CURSOR (

)

buttons to select (highlight green)

FORMAT

, and

then press the F4 (

) button.

The format screen where you can choose Quick Format

or Full Format opens.

3. Use the JOG/DATA dial to select

QUICK FORMAT

and press the F4 (

) button.

QUICK FORMAT

confirmation message appears.

4. Press the F2 (

YES

) button to execute the quick

format. If you want to cancel the quick format,

press the F1 (

) button.

5. Once the quick format completes, the message

closes, but the

FORMAT

screen remains open.

NOTE

When a card is formatted, one song is automatically created

in the

MUSIC

folder.

Содержание DP-32 Digital Portastudio









































































































Результаты поиска

Содержание DP-32 Digital Portastudio

Отзывы:

Бренды по названию

Популярные бренды

Tascam DP-32 Digital Portastudio, Руководство пользователя

Результаты поиска

Содержание DP-32 Digital Portastudio

Отзывы:

Бренды по названию

Популярные бренды