Tascam DP-32 Digital Portastudio Скачать руководство пользователя страница 22

Страница: 22 / 104

TASCAM DP-32

3 – Names and Functions of Parts

GUITAR indicator

This indicator lights when the LINE-GUITAR switch on

the rear panel is set to GUITAR.

Display area

While viewing the screen, use the JOG/DATA dial or

the CURSOR (

) buttons to, for example,

return to the Home screen, open the

screen,

assign input signals to tracks and change parameters

for each input and track. (See page 26 for details.)

PHANTOM (+48V) buttons/indicators

Use these buttons to turn phantom power on/off for

MIC/LINE INPUTS A-D and E-H on the rear panel.
The PHANTOM indicators light when phantom power

is turned on for each set of inputs.
When the GUITAR indicator is lit, even if phantom

(+48V) power is ON (indicator lit) for E-H, INPUT H will

not receive phantom power.

CAUTION

• Use the STEREO fader to lower the output volume

of the unit before turning phantom power on or off.

Depending on the microphone, a loud noise could

occur, possibly damaging equipment and harming

people's hearing.

• Do not connect or disconnect a microphone when

phantom power is turned on.

• Turn phantom power on only when using a

condenser microphone that requires phantom power.

• Do not supply phantom power to an unbalanced

dynamic microphone.

• Supplying phantom power to some types of ribbon

microphones could break them. Do not supply

phantom power to a ribbon microphone if you are in

doubt.

OL indicators (A-H)

These indicators light when the input source signal is

too loud.

TRIM knobs (A-H)

Use these knobs to adjust input levels. (See "Making

the first recording" on page 46.)

SOURCE buttons/indicators

When you press one of these buttons, the

corresponding input (INPUT A to H) is selected as the

input source (and its button lights).
Operation of mixer controls and other functions affect

the selected input.
These buttons are also used to assign input sources to

tracks (see "Assigning inputs" on page 40).

Top panel

Содержание DP-32 Digital Portastudio









































































































Результаты поиска

Содержание DP-32 Digital Portastudio

Отзывы:

Похожие инструкции для DP-32 Digital Portastudio

Бренды по названию

Популярные бренды

Tascam DP-32 Digital Portastudio, Руководство пользователя

Результаты поиска

Содержание DP-32 Digital Portastudio

Отзывы:

Похожие инструкции для DP-32 Digital Portastudio

Бренды по названию

Популярные бренды