84
TASCAM DP-32
14 - Using CDs
10. Use the JOG/DATA dial to change the song position.
Press the F2 (
SELECT
) button to confirm.
To change the order of multiple songs, repeat the
steps 9 and 10 above.
11. When the song order is as you want, press the
F1
(
g
) button to return to the
WRITE SONG LIST
screen.
12. To change the gap between the songs, press the F3
(
GAP
) button.
The
WRITE SONG GAP
screen opens.
13. Use the CURSOR (
5
/
b
) buttons to select (highlight
blue) the song for which you want to change the
length of the gap that follows it, and then use the
JOG/DATA dial to set the gap length.
The song gap can be set between 0.0 to 9.9 seconds,
in 0.1-second units.
NOTE
To change the gap between multiple songs, repeat step
13
above.
14. You can also press the F2 (
ALL
) button to set all
gaps at once.
Use the JOG/DATA dial to set the gap between the
songs.
Press F2 (
SET
) to confirm the setting and return to the
WRITE SONG GAP
screen.
15. Once you have completed setting the gap
lengths, press the
F1 (
g
)
button to return to the
WRITE SONG LIST
screen.
16.
After you have finished changing the song order
and song gap settings, press the
F4 (
t
) button.
17. When the confirmation message appears, press the
F2 (
YES
) button to confirm.
CD-R/CD-RW writing starts.
NOTE
If you want to cancel the writing, press the
F1
(
NO
)
button to
return to the
WRITE SONG LIST
screen.
18. When writing completes, a message appears
asking whether you want to write another CD-R/
CD-RW with the same contents.
If you want to burn another CD-R/CD-RW with the
same contents, press the F2 (
YES
) button. If you
do not want to burn another disc, press the F1 (
NO
)
button.
Using Track At Once
When using Track At Once, after one track is written, a
two-second gap is added after it.
1. When in
Multi Track
mode, press the CD button
to open the
CD
menu.
2. Place a blank CD (unused CD-R/CD-RW disc or a
completely erased CD-RW) on the disc tray.
NOTE
If you put a CD-R/CD-RW that has been used previously to
write tracks using Track At Once and has not been finalized,
you can add another track to it. In this case, no pop-up
window to confirm erasure of the CD-RW appears.
3. Use the JOG/DATA dial to select (highlight blue)
MASTER WRITE
and then press the F4 (
t
) button.
Содержание DP-32 Digital Portastudio
