20
TASCAM CD-9010
4 – Playback
Auto ready function
If the auto ready function is ON, when a track finishes playing,
playback standby will occur at the beginning of the next track.
1. Press the
MENU
button to open the
MENU
screen.
2. Open the
PLAY
menu screen.
3. Select
AUTO READY
.
3. Press the
DATA
dial to move the cursor right to select the
setting.
4. Turn the
DATA
dial to set the value to
ON
(default is
OFF
).
5. After setting the value, press the
HOME
button to return
to the Home Screen.
NOTE
If the auto cue function is set to ON, the unit enters playback
•
standby at the point where sound starts in the next track
rather than at the very beginning of the track.
The auto ready function setting is retained even when the
•
power is turned OFF.
Incremental playback function
When the incremental playback function is ON, and the unit is
playing back, you can use the PLAY button to start playback
from the beginning of the next track or the STOP button to
enter playback standby at the beginning of the next track.
1. Press the
MENU
button to open the
MENU
screen.
2. Open the
PLAY
menu screen.
3. Select
INCREMENTAL PLAY
.
4. Press the
DATA
dial to move the cursor right to select the
setting.
5. Turn the
DATA
dial to set the value to
ON
(default is
OFF
).
6. After setting the value, press the
HOME
button to return
to the Home Screen.
NOTE
When the incremental playback function is set to ON and
•
the unit is in playback standby mode, pressing the PLAY
button will start playback from that position. In playback
standby, pressing the STOP button will stop playback.
When the last track of the
•
CD is being played, pressing PLAY
starts playback of the first track on the CD. Pressing STOP
pauses at the beginning of the first track on the CD.
The incremental playback function setting is retained even
•
when the power is turned OFF.
ONLINE BACK CUE function
If this function is on, when the ON LINE button is turned OFF
on a connected TASCAM RC-9010/RC-9010S remote control
(sold separately), the unit immediately enters playback standby
at the last cue point (the last point where monitoring playback
started).
1. Press the
MENU
button to open the
MENU
screen.
2. Open the
PLAY
menu screen
3. Select
ONLINE BACK CUE
.
4. Press the
DATA
dial to move the cursor right to select the
setting.
5. Turn the
DATA
dial to set the value to
ON
(default is
OFF
).
6. After setting the value, press the
HOME
button to return
to the Home Screen.
NOTE
The ONLINE BACK CUE function setting is retained even when the
power is turned OFF.
PLAY KEY FUNCTION setting
When the ON LINE button is turned OFF on a connected
TASCAM RC-9010/RC-9010S remote control (sold separately), the
PLAY button operates as described below.
When set to
Normal
Pressing the PLAY button during playback has no effect. If
INCREMENTAL PLAY
is set to
ON
, however, pressing the PLAY
button during playback allows incremental playback.
When set to
Back Cue
If the incremental play function is OFF, pressing the PLAY
button skips to the last cue point and continues playback.
Pressing the PLAY button in this case activates monitoring
playback (monitoring outputs ON, line outputs OFF).
1. Press the
MENU
button to open the
MENU
screen.
2. Open the
PLAY
menu screen.
3. Select
PLAY KEY FUNCTION
.
4. Press the
DATA
dial to move the cursor right to select the
setting.
5. Turn the
DATA
dial to set the function when online
playback mode is OFF (default is
OFF
).
Values are
NORMAL
(default value) and
BACK CUE
.
6. After setting the value, press the
HOME
button to return
to the Home Screen.
NOTES
Similar operation is possible using the MONITOR button.
•
The PLAY KEY FUNCTION setting is retained even when the
•
power is turned OFF.
