![background image](http://html1.mh-extra.com/html/tascam/cd-9010/cd-9010_owners-manual_3685880037.webp)
TASCAM CD-9010
37
10 – Troubleshooting
If the unit is not functioning properly, please check the following
items before calling for service. If you are still unable to resolve
the problem please contact the retailer where you purchased
the unit or TASCAM customer support (see the back cover).
Power does not turn on
8
Confirm that the power plug is inserted completely.
Media is not detected
8
Confirm that the CD is loaded properly.
Stop playback once.
Unit cannot be controlled
8
Confirm that the panel lock function is not on.
Unable to playback a file
8
If it is a WAV file, confirm that it uses a sampling frequency
(44.1 kHz or 48 kHz) and a bit rate (16 or 24) that are
supported by this unit.
No sound
8
Confirm the connections with the monitoring system and
check the volume of the amplifier.
Changed settings are not saved
8
This unit backs up settings whenever you change them. This
backup could fail if you turn off the power while this data
is being written, so do not turn the power off immediately
after changing a setting.
I hear noise
8
Check if any connecting cable might have a bad connection.