Tartan 4000 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 80

Tartan 4000 Скачать руководство пользователя страница 57

T4000 OM

Years of Original

Warranty

Period

Remaining

Years of Adjusted

Warranty

Period

Remaining

11-‐14

5

6 -‐ 10

3

1 -‐ 5

1

In no event shall the Basic Warranty of the Limited Warranty be transferable to

any subsequent owner.

II. Limitations on Warranty

IN    NO   EVENT   SHALL   TMC   BE   LIABLE   FOR   ANY   INDIRECT,   SPECIAL,   INCIDENTAL,
CONSEQUENTIAL,        PUNITIVE   OR   OTHER   DAMAGES,   INCLUDING   BUT   NOT   LIMITED   TO
DAMAGE   TO    OR       LOSS          OF       USE       OF       PROPERTY           OR       EQUIPMENT,          OR       ANY           OTHER
DAMAGE          DIRECTLY          OR   INDIRECTLY       ARISING       FROM     THE     SALE,     HANDLING       OR   USE     OF
THE        TARTAN        YACHT,        OR   FROM    ANY   OTHER   CAUSE   RELATING   THERETO   AND/OR   TMC’S
LIABILITY   HEREUNDER.        TMC SHALL   NOT   BE   LIABLE   FOR   ANY   CLAIMS,   DEMANDS,     INJURIES,
DAMAGES,        ACTIONS   OR   CAUSES    OF   ACTION   WHATSOEVER   BASED   ON   NEGLIGENCE   OR
STRICT LIABILITY.

Further, the following items

are not covered

under this Limited Warranty and/or any

damage or failure directly or indirectly caused by any of the following:

• Fuels, lubricants, filters, coolants, and belts

• Sails, battens, running rigging and deck hardware

•

Paints, varnishes, gel coats, chrome-‐plated or anodized finishes, or other surface

coatings other than as specifically described in the Blister Warranty

• Osmotic blistering if the gel coat has been sanded, sandblasted or subjected to

abrasives, or damaged by collision, impact or contact

and such actions shall void the

Blister Warranty

• Wooden parts that have warped, expanded, or contracted

• Abuse or negligence

• Improper operation

• Misuse, alteration, tampering, and changes, including installation of non-‐

genuine Tartan parts or accessories

• Alteration, tampering, or changes to the mast, spreaders, spreader bars, standing

rigging, or spinnaker pole

«
...
55
56
57
58
59
...
»

Содержание 4000

















































































Отзывы:

Нет отзывов