Tartan 4000 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 80

Tartan 4000 Скачать руководство пользователя страница 48

T4000 OM

"

Clean, Dry, Tight" are the three most important factors in battery and electrical

maintenance.

12.13 Upholstery

12.13.1 CLOTH

The     cushions     and     seat     backs     on   your     Tartan     Yacht     are   covered     with     relatively       stain-‐
resistant       fabric,   which     should     only     be     dry     cleaned.           However,       consult     your     local     dry
cleaner     before     attempting     this   process. It   is   important that the upholstery be kept aired and
that it   be dried after use to prevent mold   development.   If   the   yacht   is   to   be   left   unused   for
prolonged   periods,   it   is   advisable   to   stand   the   cushions    on   end   so   that   air   can   circulate
around them. It   is also advisable at such times to clean out all lockers,   removing all dampness
and leaving locker doors open.

12.13.2 ULTRASUEDE and ULTRALEATHER

Please consult your care and maintenance card provided by Ultra Fabrics regarding the
cleaning of your ultraleather or ultraseude fabrics.

12.14 Steering

The manufacturer's instructions for maintaining your steering system should be followed

closely.   The complete system, including bolts should be inspected thoroughly each season.
In   addition   to   the   above,   an   inspection   should   be   carried   out   every   other   year   with   the
system   under   heavy   load.       While   under   load,   look   for   parts   bending,   distorting   or   creaking.
Watch for any indication of failing in   the   system     when   under   full   load   for   a   period   of   time,
and   report   any   abnormalities     to   your   Tartan   dealer.
12.15     Deck Fittings

Any deck fitting which is under load (chain plates, genoa tracks, line stoppers, etc.) should
be checked on a regular basis and re-‐bedded with marine sealant if found to be leaking.

12.16 Miscellaneous

Good maintenance is most important aboard your yacht. If you take care of the yacht's
system, it will take care of you.

13.0 FITTING OUT

Note: Tartan Yachts must not be lifted in their shipping cradles by fork lifts without

«
...
46
47
48
49
50
...
»

Содержание 4000

















































































Отзывы:

Нет отзывов