18
E.Troubleshooting
Drifts occur in pan
axis of AL Mode.
Angle is not level.
Gimbal vibrates.
ASSEMBLY SECTION
5
1. Sensor error is too large.
2.Flight control module is
unconnected.
1. Calibrate sensors.
2. Connect to ight control module.
1. Error of sensors is too large.
2. Tx is not centered.
1. Calibrate sensors.
2. Center the Tx.
1. The camera is not
screwed down.
2. Motor torque is too large.
1. Screw down the camera and
lens screws.
2. Decrease motor torque value slightly.
