12
TIPs
：
Descriptions
：
Working Mode
Attitude Lock
(AL)Mode
Pan Follow
(PF)Mode
First Person View
(FPV)Mode
Descriptions
The angles of Roll,
Pitch and Pan keep
unchanged.
The angles of Roll
and Pitch keep
unchanged, while
the angle of Pan
axis changes
according to the
head of the
multi-rotor.
The angles of Roll,
Pitch and Pan axis
change according to
the attitude of the
multi-rotor.
Tx Control
Under Control
Under Control
Under Control
Attitude
Stability
V i b r a t i o n
Reduction
Working Mode setup
：
Position 1 and Position 3 can be exchanged
：
Choose a three-positioned switch
：
Mode
ASSEMBLY SECTION
5
When the
MODE port is unconnected
, the gimbal can only work in the
DEFAULT mode. Moreover, during ight, if the MODE is unconnected
suddenly, the working mode would remain the same before disconnection.
After powering up the gimbal, if
the receiver is unconnected
, it works on
DEFAULT MODE.
Position 1 refers to FPV Mode; Position 2 corresponds to PF Mode;
Position 3 corresponds to AL Mode.
②
Choose a two-positioned switch:
Only two working mode is available: please refer to the cursor position
of MODE Channel in the assistant software of detailed information.
√
√
√
√
√
√
