16
TARGET ECO I FEEDING, rev.09
TARGET ECO I FEEDING
5.2
Password
The controller has two levels of password
access to restrict access to some of its
functions. The password is made up of
4 digits. When it is correctly entered, the
current user is identified by the controller.
Installer’s Password (0-6-1-0)
By default, the installer’s password is set
to
"0 - 6 - 1 - 0"
. This password gives full
access to all functions of the controller. It
can also be modified as explained below.
User’s Password (0-0-0-0)
The user’s password gives access to basic
functions of the controller. By default, it is
set to
"0 - 0 - 0 - 0"
and it cannot be modi-
fied. The controller automatically selects this
user level after 15 minutes of inactivity.
Entering / Changing the Password:
Select:
12. Password
•
Selecting a new user level:
Enter the password of the desired user level
(user’s or installer’s password). The mes-
sage “invalid password” prompts on screen
if an incorrect password is posted.
•
Changing the installer’s password:
In order to modify the installer’s password,
you must first enter the installer’s pass-
word. Then, the controller prompts the
“change the password” menu. Enter the
new installer’s password if required.
•
Confirm the password:
Confirm the new installer password.
IMPORTANT
Choose an easy-to-
remember password and
write it down in a safe
place!
Password
Exit: Press BACK
Change: Press Modify
Press to Select an item
Current user :
User 1
Change the user * * * *
Change the password * * * *
Confirm the password * * * *
29
TARGET ECO I FEEDING, rev.09
TARGET ECO I FEEDING
7.2
Run Time / Consumption
History
The controller has an history menu in which
the daily run times of each ration are dis-
played for the past 75 days. In addition,
the controller can present run times val-
ues as is or it can convert them into the
corresponding amount of feed that was
distributed. Refer to the Installation Setup
section of this manual to enable the de-
sired type of history : run time or consump-
tion history (sec. 5.3).
Select:
8. History
1-8. Select Desired Ration Auger
The run time or consumption history of the
selected ration auger is displayed.
Fill Auger Run Time 75 days
Total 115 min.
Today 25 min.
May 12 200X 25 min.
May 11 200X
60 min.
Exit: Press Back
Resetting the Run Time History
Histories are reset at the beginning of a
new batch. The run time history can also
be reset manually as follows :
Select:
8. History
9. Runtime Reset
•
Reset Run Time Ration #X ?
Select “Yes” to delete the history of the
desired ration auger.
History – Reset runtime
Exit: Press BACK
Change: Press Modify
Press to Select an item
Reset runtime Ration #1?
No
Reset runtime Ration #2?
No
Reset runtime Ration #3?
No
Reset runtime Ration #4?
No
Reset runtime Ration #5?
No
Reset runtime Ration #6?
No
Reset runtime Ration #7?
No
Reset runtime Ration #8?
No