TARAL VST 818, Руководство пользователя, Страница: 6 / 60

Do not try to pass over cars on road.
If the traffic behind becomes busy, pull over at an appropriate
place and give way to the vehicles behind.
This tractor is compatible for both RH traffic and LH traffic drive.
Check, and ask dealer if necessary to adjust, front lamps and
mirror regarding local regulations in your country.
TREATMENT OF
A NEW TRACTOR
All components of your tractor are subject to stringent checking
during assembly in the factory. However, a new tractor should
be carefully checked over by the operator himself for the first
25—50 hours operation, heavy duty work should be avoided. If
heavy duty work is unavoidable, drive in a gear one stage lower
than you would normally use, and run the engine at lower rpm.
“IMPORTANT”
50 HOURS SERVICE
When the tractor is brand new, after the first 50 hours of run-
ning, the following service, maintenance and checking should
be carried out as specified below.
1. Replace engine filter and engine oil.
2. Replace transmission oil.
3. Retighten all bolts and nuts, paying special attention to
those for steering linkage and wheel.
4. Check and adjust the fan belt tension.
5. Check the wheels to see if their condition is good and tire
pressure is correct.
6. Retighten the cylinder head bolts and adjust valve clear-
ances.
7. Front axle diff. case and gear case oil replacement of 4-
wheel drive tractor.
8. Clean the air cleaner element.
9. Clean the fuel filter.
10. Check the front hub for end-play.
11. Check the battery electrolyte.
12. Clean the hydraulic oil filter.
This 50-hour Service is an essential procedure for keeping the
tractor in top condition, so it must be done properly.