TANNER Scientific TN50, Руководство по эксплуатации

Страница: 14 / 42

Operating Instructions – TN50
14
7. INITIAL OPERATION
7.1 MAIN DISPLAY
The main display will show the cutting thickness, the
trimming thickness, the current chamber temperature,
the target chamber temperature, the status of the
quick-freeze unit (optional).
CUT: 7 µm Trim: 19µm
Cha: -20 °C (-22) QF: 0
7.2 CONTROL PANEL
Software settings and motor operation can be
operated with the control panel on the left to side of
the instrument.
TN50 Control Panel.