TANDBERG Scholar MXP, Сборка, настройка и руководство пользователя

Страница: 29 / 32

PRESENTATION
Page 29 of 32 TANDBERG SCHOLAR ASSEMBLY, SETUP AND USER GUIDE | D50564.01
audience.
Utilizing the PRESENTATION tool can be an effective way to present content other than through the MAIN
CAMERA. You are now able to present contents of a connected PC/laptop computer, a document
camera, or a video clip from a VCR or DVD player with a second stream, while the main camera can be
utilized to maintain “eye-contact” with the
1. While in a videoconference call, press PRESENTATION. If the button is not present, you are not able to initiate a
Presentation session at this time
2. The Presentation page will appear. You will see source selections for the MAIN video display, as well as the
source selections for the PRESENTATION display.
3. Select the desired PRESENTATION source you wish to present. The far-end site will be able to see your selected
source.
4. Press PRESENTATION again to discontinue sending a presentation source. This will not disconnect your call.
FAR END CONTROL
It is possible to get some control of the far end system. This allows for
control of the conference partner’s camera, video sources and
presets. Enabling Far End Control in the codec’s ‘Control Panel’ will
allow the system to do Far End camera control and camera presets
on the far end camera. See Far End Control in the TANDBERG 6000
MXP Manual for more details.
You can initiate Far End Control using your touch panel only if the Far
End has been properly configured.
Press the FAR END button to view the FAR END CONTROLS (purple). If the Far End is not configured to do, the touch panel
will display “Far End Control Not Possible.” (You may ask the Far End participant to enable Far End Control via their
codec’s Control Panel.)