TANDBERG Scholar MXP, Сборка, настройка и руководство пользователя

Страница: 21 / 32

Page 21 of 32 TANDBERG SCHOLAR ASSEMBLY, SETUP AND USER GUIDE | D50564.01
General Codec Configuration:
1. Open the General Settings menu
a. Press OK on the remote to open the ‘Main Menu’ (if it is not already open).
b. Select ‘Control Panel’ and then select ‘Administrator Settings’.
c. Select ‘General’ to open the ‘General Settings’ menu.
2. Language
Press OK in the Language field and select the language you want to use from the list. There are 13 languages to
choose from. The touch panel will only display English.
NOTE: This changes the language used on the menus of the codec only and not the touch panel!
3. System Name
Enter a name in the ‘System Name’ field using the number keys on the remote control, as you would do with a
mobile or cellular phone.
4. Dual Monitor
If you are using two monitors, set Dual Monitor to On.
If you are using one monitor, set Dual Monitor to Off.
5. Auto Answer, Max Call Length, Global Phone Book Settings and Permissions
Leave Auto Answer, Max Call Length, Access code and Permissions unchanged if no special needs are required.
6. Screen Settings
When using wide screen (16:9) monitors, set TV Monitor Format to Wide (16:9). TANDBERG also recommends
setting Picture Layout to Picture outside Picture when using 16:9 monitors. Picture outside Picture provides a
display layout optimized for wide screen monitors. The display layout may be changed at any time using the Layout
button on the remote control.
7. Software Options
To activate MultiSite and bandwidth, you must enter a new option key in the Software Options menu (see
paperwork accompanying your system). For more information on these options, contact your TANDBERG
representative.
8. Save changes
Remember to save any changes you make in a menu by selecting the Save button on the Menu line and pressing
OK.
Network configuration:
1. Open the Network menu
Open the ‘Administrator Settings’ menu and choose ‘Network’.
2. ISDN configuration
Set ‘Current Network’ to the network you want to use. Specify the settings for the selected network in the relevant
menu.
3. LAN configuration
In the ‘Administrator Settings’ menu, choose ‘Network and LAN Settings’. Specify the necessary LAN settings
according to the instructions from your LAN administrator.
4. Save changes
Remember to save any changes you make in a menu by selecting the Save button on the Menu line and pressing
OK.
Monitor volume:
1. Adjust monitor volume
Use the monitor remote control to adjust the volume of the monitors. This volume will be the default volume for all
calls.