TANDBERG Scholar MXP, Сборка, настройка и руководство пользователя

Страница: 10 / 32

7. Insert the ¼“–20 x 2.5”
BOLTS (4) into the CAPS (4)
mounting the COVER PANEL
and the SCHOLAR EQUIPMENT
RACK to the VERTICAL POSTS.
8. Place the .5” SPACERS (2)
behind SPEAKER BRACKETS-A
(2) and mount them to each of
the POSTS using ¼”–20 x
3¼” BOLT & NUTS and ¼”
WASHERS (8).
DO NOT TIGHTEN SPEAKER
BRACKETS AT THIS TIME.
9. Remove the top cover for each
of the DISPLAY BOXES. Leave
the DISPLAY in the bottom
packaging for the next step.
10. Attach
*
the DISPLAY
MOUNTING BRACKETS (2) to
the rear of the DISPLAYS using
M8 x 16 BOLTS (4).
* When attaching the BRACKET to the
NEC displays you will need to remove
the DISPLAY MOUNTING ADAPTERS
(4) to access the appropriate
mounting holes for your particular
display. Replace the ADAPTERS when
BRACKETS are mounted.
NOTE: Use the INSIDE HOLES on
the DISPLAY MOUNTING
BRACKETS as shown to attach to
the DISPLAY.
Page 10 of 32 TANDBERG SCHOLAR ASSEMBLY, SETUP AND USER GUIDE | D50564.01