TANDBERG MCU, Руководство пользователя

Страница: 49 / 65

TANDBERG MCU
49
Configure the MCU
Quality of Service
The network must support Quality of Service for these settings to work.
RSVP
Off No RSVP Quality of Service is initiated for any connections.
Auto Resource Reservation Protocol enables the MCU to request the optimal amount of
bandwidth for the duration of an IP video call.
QoS Mode
Off No QoS is used.
Diffserv Diffserv QoS method is used. Please see ‘QoS Mode Configuration’ for details.
Precedence IP Precedence QoS method is used. Please see ‘QoS Mode Configuration’ for details.
QoS Mode Configuration
Diffserv is used to define which priority audio, video, data and signaling packets should have in an IP network. The
priority ranges from 0 to 63 for each type of packets.
Precedence is used to define which priority audio, video, data and signaling should have in an IP network. The
higher the number, the higher the priority. The priority ranges from 0 (off) to 7 for each type of packets.
In addition to Precedence, Type of Service can be used and enables the user to define what type of connection
that should be chosen for the IP traffic. Helps a router select a routing path when multiple paths are available.
Off Sevice not active.
Min. Delay Will choose a route where minimum delay is prioritized.
Max. Throughput Will choose the route with highest bandwidth.
Max. Reliability Will choose the route where minimum packet loss is prioritized.
Min. Cost Will choose the cheapest connection available.
Save
Press ‘Save’ to activate the new settings.